I am assuming you want to remove this to view the factory code of the keyless entry module. Start on the passangers side. use a thin metal puty knife. insert the blade between the dash and vent cover and cafefully pry up. the cover is held on by spring clips on the back (dash) side and tabs on the front (windsheild side). work your way across the dash until the entire back side of the vent has been freed. Lift the cover up and back to remove
remove the screws and remove the panels..enjoy
On a 2001 Ford Explorer Sport Trac : I believe the PCV valve is on the REAR of the drivers side engine valve cover ( between the valve cover and the firewall )
remove the screws, and with care pull it up and out.
To remove the upper console in a 2002 sport track, kindly use your manual so that you get everything in order.
The 2007 Ford Sport Trac inside door panel is held in place by six retaining clips. Pry outward on each retaining clip to remove the door panel.
On a 2004 Ford Explorer Sport Trac : ( open the drivers door , and in the drivers end of the dash you will see the removable plastic fuse panel cover )
remove a couple screws and carefully lift up and then out with it.
Ford Explorer Sport Trac was created in 2000.
where is the pcv valve on a 2007 ford sport trac
On 2004 ford exp sport trac is 99mph
If they are the same as on a 2001 Sport Trac, they are P25570R16...Hope this helps
In the front passenger footwell , by the kick panel access cover