Swith the Ignition Off
Hold Miloemeter Trip Reset In (keep held in)
Turn on Ignition
Still Hold Trip Reset for approx 12 seconds, the InSP should change.
Release trip reset.
Switch off ignition
Switch on ignition and check.
needs to be done with a diagnostics machine.
Disconnect Battery for an hour, reconnect... Done
Hold the break pedal down and the milometer trip button turn on the ignition whilst holding these in the service light will flash then resets
You don't!
If its vectra b to reset ECU you have to turn key so all display leds light up then off and do it 8 times if i remember rightly, this resets ECU to factory settings.
you will need this... VAUX-COM PC based tool for Vauxhall to recode the immobilizer
Just press the trip reset button
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
'Engine Airbag Code Reset Tool Vauxhall Meriva Zafira
Press the trip count reset button and put your foot on the brake at the same time, when engine is switched off. Wait 12 seconds and turn ignition on. that should do the trick. it worked for me on my Vectra 2.2 auto petrol and it also worked for my son on his 2.2 auto desiel .
how do you reset the service indicator on a 07 vauxhall combo van
1 Turn Ignition off 2 Hold trip reset In 3 Turn Ignition on still holding trip reset and wait for three dashes 4 Turn off Ignition 5 Turn on Ignition to confirm reset To the best of my knowledge the above service reset procedure is applicable to most Vauxhall.