if you look under the hood on the upper left side by the hood hinge , there is a diagram of how the serpentine belt should be arranged. Fit the belt around all the pulleys except the tension pulley. Take a tork wrench and place on the nut in the center of the pulley and crank it towards yourself which will lower the pulley (please note that it is spring loaded so make sure you have it securely fitted or it will spring back at you. slip the serpentine belt on once you have created enough clearance to slip on...
YesYes
Loosen the tensioning pulley and install new belt. There should be a routing diagram in engine compartment or on hood.
How to replace or change the 1997 Dodge Caravan 3.3 liter engine
NO.
Go to www.autozone.com and look under specifications, belt routing. On a 1989 Dodge Grand Caravan, the diagram is on the side of the engine where the S-belt is located.
The 3.8 liter V6 engine in a 2001 Dodge Grand Caravan has a timing CHAIN
Replace it every 120,000 miles. This is NOT and interference engine.
You cannot replace a 94 V6 3.0 Dodge Caravan engine with a 4 cylinder 2.4 Plymouth Voyager engine. The reason is because the engine is too small.
Does a 1995 dodge caravan SE have an interference engine?" Does a 1995 dodge caravan SE have an interference engine?"
If the belt screeches when you turn at low engine rpm you need to change it. This separate steering belt is on the 2.4 Caravan, 1996-2000. - On all other models it's driven by the serpentine belt.
SHOULD BE ON THE FRONT MOLDING UNDER THE HOOD....WHERE IT SAYS WHAT SIZE ENGINE YOU HAVE
No, it is possible to replace them in vehicle.