Open trunk. Remove the trunk liner. Remove the nuts holding the tail light assemblies in place. Remove the light assembly. Twist the bulb socket 1/4 turn and pull out. Replace bulb. Reverse procedure tin install.
replace fuse
Changing dash panel lights 1995 Mercury sable how do I do it
Hmmmm... The first response is which bulb?Gotcha covered with the related questions below, from headlights to tail lights to high-mount brakes lights...
If you are afraid of breaking something take it to a garage.
open the trunk and there should be a couple screws where the lights are.
Tail Lights Fade was created on 1999-12-03.
Burnt fuse...the tail lights and dash lights run together. Replace the fuse and if it burns again, change tail light bulbs first (some may be bad even though they work) and then look for bad wiring if the bulbs haven't fixed it.
In order to find out how to replace broken tail lights on a car, one can go to the WikiHow website. The website has a seven step tutorial on how to fix tail lights complete with pictures.
NoNo
When your tail lights are out you can simply replace them. If they continue to blow, you may have an electrical problem.
If dash and parking lights do not work - check the fusesMay also be a bad headlight switchThe tail lights and brake lights on my 2002 would not work at the same time. Had to replace whole tail light assembly. Was told problems with jeeps-the circuit boards in older jeeps overheat and short out.
Check the fuses first then check the bulbs.