study for it
Plate load test is to find the bearing capacity and the settlement of the foundation. Description:: a test plate, square or circular in shape, are used. The plate is placed at the proposed level of the foundation and is subjected to incremental loading. Settlement at each increment of the loading is measured and a load-settlement curve is plotted. Bearing capacity and the settlement of the foundation are determined from the load-settlement curves.
SBC is the safe bearing capacity of a soil, beyond this value if soil is loaded, it will fail to bear the load applied on it and will fail. Its value can be found out by standard penetration test, plate load test or cone penetration test.
The initial load in Rockwell hardness test is 10KGf.
You can take it to a battery place and they can test it under a load.
dc motors can be operated at no load as well as at load condition.But by using the swin burns test the efficiency can be calculated at no load which is more benficial than load test.At industries this swin burns test is used because for load test we have to give separate supply for the load to run.In no load test that power is saved.
example of static load test
Battery load test
A load test on a transformer is done to make sure it stays within its designed temperature range while on full load.
California bearing ratio
Bearing capacity of soil
When you do a load test on a 3-phase induction motor you are checking the power factor, viz slip, and efficiency of the motor. You can test various loads with this test.
If only oxygen is in the test tube, it may burst into flame.