0
you can buy little cans that have 2oz of freon in them and 2oz of oil --add like you was charging system-------or----when you evacuate system and while it is still under vacuum, lower your yellow hose into refrig oil,open gauges until the amount you want to add ,then follow it up with some freon -------try to not add anymore air to system than you have to
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is mist lubrication system?
Mist lubrication system is that, in which the lubrication of a bearing is done by the oil in the form of oil mist.
Can Waste Transformer Oil be Regenerated?
Yes, Special Transformer Oil Regeneration System can recycle and regenerate the unqulified transformer oil.As is well known the Transformer plays an important role in the generation, transmission and distribution of electrical energy. Under load the transformer, dissipates heat and the insulating oil acts as a coolant as well as an effective dielectric. Due to the highly hygroscopic nature of the transformer oil, it absorbs moisture from windings, which leads to gradual deterioration of dielectric strength. Also there are some waste impurities, gas contents in the transformer oil which destroy the oil's quality.Transformer Oil Regeneration System is the most efficient and economical purification system.Special Transformer Oil Regeneration System is applied to filter various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line.Transformer Oil Regeneration System owns following Features:1. Duplex 3D stereo-evaporation, eliminating the liquid water quickly2. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.3. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power4. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment5. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV6. The oil of any grades can be treated on line at the working site.7. Can be operated both on-load and off-load.8. Can be operated fully-automatically with PLC controller.9. this Oil purifier can be made in hermetical, canopy-covering, open and frame style.Transformer Oil Regeneration System Has Following Advantages:dewater, degas and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.Contact me for more information if you have any more questions via: kevinnchiang@gmail.com , or call me at 0086-135-2739-0908, or sent message to my MSN ID: new8628@hotmail.com .Additional Key Words:..... Transformer Oil Regeneration Systems, Turbine Oil Reclamation Systems, Lube Oil Purifier, Transformer Oil Purification Systems, Hydraulic Oil Filtration Machine, Compressor Oil Recycling Plant, insulation oil purifier, transformer oil purifcation systems, Oil Filtraton System, Oil Treatment Machine, Oil Cleaning System, Oil Recycling Machine, Oil Reclamation Machine, etc...kevinnchiang@gmail.com, new8628@hotmail.comCell: 0086-135-2739-0908
How is the flow of oil in a hydraulic system measured?
The flow of oil in an hydraulic system can be compaired to any water system; in both systems you will find the tank (place where the liquid is store), the conduits or channels through which the liquid will travel (pipes), the pump (to impulse the liquid through long distances or to de a job such as filling a cylinder (piston) or pushing hot or cold water through an air conditioning system in a building, filters (to ensure purity of the liquid), and finally you may have temperature controls. The oil characteristics of a hydraulic system are such that permits the oil to perform amazing work such as keeping a building structure level (this is the case at the outshore airport of Tokyo, which keeps sinking into the see bed and by means of hydraulic systems they turn the support of the structure hydraulic jacks as needed to keep the whole airport level. The brakes in any car is another example of a hydraulic system where the flow of oil impulse by the brake pedal and or the ABS pump will force the pads of the brakes grab the wheel discs hindering the wheels from turning. The power steering in any car is another example of oil flowing trough pipes to help the driver turn the car around.
Why hydraulic oil is used not water in hydraulic system?
because water evaporates hydraulic oil is non corrosive and an excellent lubricant.
Oil is used in industrial hydraulic system because?
oil is used in industrial hydraulic system because
What kind of oil does a R408 refrigeration system use?
mineral oil
What other substance circulates in the refrigeration system with the refrigerant?
The compressor oil
What are the functions of refrigeration compressor oil in a refrigeration system?
Oil in a AC compressor is there so that the mechanical parts don't over heat from friction
What is the purpose of oil in refrigeration system?
To prevent wear on the compressor.
What are the two products that should be circulating in a refrigeration system?
freon and oil
When moisture is present in a refrigeration system it will react with the refrigerant and the oil to form?
Ice
When moisture is present in a refrigeration system it will react with the refrigerant and the oil will form?
ACID
What is the purpose of oil within a refrigeration system?
It's a Lubricant. It lubricates parts.
What are the only two products that should be circulating in a refrigeration system?
freon and oil
What is the result of sludge in a refrigeration system?
Sludge in refrigeration is a combination of water, acid and oil, normally this combination will eat the varnish on the windings of the compressor and short it out.
You added freon to your 2001 Sebring LXi and now it makes this humming noise The air works but you dont know what that noise is?
Did you add an oil charge to the system when you recharged it and did you recharge the system using refrigeration gauges. The system may be low on refrigerant oil or you could have overcharged the system causing the compressor to have to work too hard.
How is the oil added to the refrigeration system?
FYI most refrigerants already have oil that is proportionate to the amount of refrigerant in the can. If you are using straight refrigerant and all you need is to add oil to your system, then there is product out there that is straight oil that can be added to the low side port in your ac system. IDQ , QUEST , and AC PRO are some companies out there that have many of these products. You can also find them in the web at www.idqusa.com along with helpfull information about your vehicles ac system.
