Want this question answered?
The cable does not have any adjustment.
Yes. Most accelerator cable can fit as long as the lengths the same. You may need to adjust it by clipping the end
If it has a cable attached to the throtle linkage, release it by moving the locking tang and pulling the cable all the way to the rear. Then get inside and floor the accelerator and it will automatically adjust the cable.
To adjust the cable, pull up the cable release at the rear of the throtle body and move the cable all the way to the rear, Then get inside the car and mash the accelerator all the way to the floor. This should adjust it.
The accelerator cable is connected with a swivel nut on each end of the cable. Loosen the swivel nut, by turning it to the left. The accelerator cable will come off. Reverse the process to install the new accelerator cable.
The 1985 Chevrolet Corvette accelerator cable is held in place with a swivel nut on each end of the cable. Turn the swivel nuts to the left to remove the cable. Reverse the process to install the new accelerator cable.
The 1989 Toyota Camry shifter linkage cables have adjustment swivel nuts on each end of the cable. Turning the swivel nuts will lengthen or shorten the shifter linkage cable.
Your 1983 Chevy Silverado accelerator cable is held in place with swivel nuts on each end of the cable. Connect the accelerator cable and secure it by turning the swivel nuts to the right.
You can adjust it at the pulleyside. There is a little retainer situated in plastickgrooves. Pull the cable tight and place tre retainer so it stays that way. No tools needed, it takes 10 secs.
how do replace an accellerator cable on a 1973 bug
The speedometer cable for a 2004 Camry?æranges in price close to $40 each. The cable should be installed by a professional.?æ
no