How do you adjust or bleed the clutch on a '94 Hyundai excel?

Answer

If you can get a hyundai repair book at auto parts store, library, or book store you will need it. the bleeding process isn't that bad, however the other adjustments require more detail. My book states the following (good supply of dot3 or better brake fluid,small transparent plastic container, wrench to loosen and tighten bleeder screw on release cylinder, and an assistant to work the clutch pedal). 1. unscrew the clutch fluid resevoir cap. 2. Loosen bleeder screw just so fluid starts to leak out of the bleeder hole. 3. fill the plastic container halfway with brake fluid. 4. Connect the hose to the bleeder screw and place the other end of the hose into the container of brake fluid. 5. Fill the reservoir to the MAX fill line and have the assistant pump the clutch pedal slowly. You will notice air bubbles rising to the top of the fluid container. KEEP the reservoir full at all times. 6. Repeat previous step until all air bubbles are gone. 7. Tighten the bleeder screw and check the fluid level. Add fluid as necessary until the proper level is reached. 8. Install the reservoir cap. Ok that is a direct quote from my book. If you plan on keeping the car invest in Auto repair book it will help greatly.

First answer by ID1190887574. Last edit by ID1190887574. Question popularity: 52 [recommend question]