answersLogoWhite

0


Best Answer

I have a 1992 Dynasty with the 3.3 Liter engine. The serpentine belt has a tensioner pulley that is spring loaded... it puts tension on the pulley automatically - if the belt is in place correctly the way it is supposed to go. You probably want to know how to get the belt on or off... I put a box end wrench around the nut in the center of the tensioner pulley. With the wrench over the nut, push back on the other end of the wrench with something long and thin. There isn't much room around that area but I found that a three foot piece of 1 X 4 wood board works well. You should feel the spring tension of the pulley when you push back on the wrench... it will move a couple of inches or so. It might be a good idea to have someone else push back on the wrench while you remove/istall the belt... just easier that way and probably safer too. Anyways, with everything in place correctly, no further adjustment is needed. If you have the serpentine belt off, it might be a good idea to check the idler pulley. The bearings don't last forever... ha! Mine lasted maybe 175,000 miles before it siezed up. The pulley, mounting bracket, new belt and tow truck expense was about $450 at a Dodge dealer. I think the bad bearing did make some noise occasionally before it went out but I ignored it. It finally went out on a cold winter morning on my way to work. Live and learn, I guess. Anyways, try not to ignore warning noises from your Dynasty and it will give you many more miles of fun. Gary... Princeton, MN.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

Should have a spring loaded tensioner and no adjustment is necessary unless tensioner is bad

It actually has a tension pulley underneath the Power Steering. Use a 15mm socket to loosen/tighten the bolt right beside the power steering. That is how you adjust the tension on the belt.

This answer is:
User Avatar

User Avatar

Wiki User

16y ago

you do not adjust a serpentine belt. the adjustment is done automatically by the tension pulley if belt is loose, purchase a new belt . also check that all pulleys are in good shape before installing new belt

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Loosen the pulley below the power steering pump. Then locate the bolt to the left aiming at the pulley. It goes through the nut on the backside of the pulley. This is how it moves the pulley along the slot tightening / loosening the belt tension. Once you get it set tighten the pulley bolt back down to lock it in place.

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

It uses an automatic tensioner- no adjustment is provided, or required.

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

Automatic tensioner- no adjustment required, or provided. If the tensioner is out of limits, replace the tensioner.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you adjust the serpentine belt on your 2000 jeep wrangler?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do you have a diagram of how the serpentine belt goes on a 2000 jeep wrangler 4.0 l?

yes


How do you adjust serpentine belt on 2000 Chevy blazer?

You can't. it has an automatic self adjusting belt tensioner on it.


How do you adjust the serpentine belt tensioner on 2000 Saturn sl2?

u do not adjust belt tensioner if belt is loose, u need to replace belt as tensioner works automatically


Where can i find a Serpentine belt diagram for a 2000 jeep wrangler sport?

I need a routing diagram for the serpentine belt on a 1998 Jeep Wranger, 4 cylinder, with air conditioning


How do you find the adjust bolt to tighten a belt on a 1995 wrangler?

If it is a serpentine belt - adjusts automatically through belt tensioner If not check the alternator for adjuster or Power steering pump


How do you adjust the serpentine belt on a 2001 Jeep Wrangler 6 cylinder It appears their is an adjustable arm below the alternator?

You cannot. It is automatically tensioned by the part that you describe. If it is out of adjustment, a new belt and tensioner is required.


If your belt just came off your jeep wrangler 1994 The belt was by the engine What is the name of this belt?

he serpentine, or accessory belt.


How do you adjust the serpentine belt on a 2003 Ford E-250 Van?

you do not adjust tension on a serpentine belt the tension is automatcally adjusted if the belt is loose, replace the belt SOME TIMES THE TENSIONER CAN BE WEEK ALSO.


Where can you find a serpentine belt routing diagram for a 2000 wrangler 6 cylinder with ac?

check under the hood on the radiator brackets or on the intake box


Why is your 99 jeep wrangler squealing when its warmed up?

serpentine belt loose


Diagram of serpentine belt 2000 Chevy Prizm?

replacing serpentine belt on 2000 chevy prizm need help


How do you Adjust serpentine belt on 1992 Cherokee 4.0?

I believe there is an idler pulley which keeps the belt tight on the 4.0. If you are experiencing slop or looseness, I suggest you look at replacing the belt or maybe the idler is stuck or broken. I had to replace an idler in a Wrangler once.