They are adjusted with shims. Unless you have a supply of shims, this job is best left to a professional.
this is wrong you can adjust the valve lash with a feel gauge intake is .018 to .022
the exhaust is .023 to .027 all in mm make sure the car is cold when you adjust the setting on the valve lash. the order to adjust the valve is when it is at rest
Replace
The valve adjustment specs on a 1993 Accord are as follows Intake-0.0008 to 0.0018 inch Exhaust-0.0022 to 0.0031 inch these specs are for the 1993 Accord ONLY!! if you have a 1990-1992 these specifications change.
The Valve clearance for a 1993 TRX Honda Fourtrax is 0.03 on a feeler gauge. 0.03 -intake 0.03-exhaust
Replace the PCV Valve.
You pour into the valve cover.
There is no adjustment.
Not sure about the 1989, but 1990-1993 it goes into the valve cover. Look for a hose running to the valve cover and the PCV valve should be what is at the end of it pushed into the valve cover.
Ok, you have a 1993 Honda Accord. Have a question.
A Freon system on a 1993 Honda Accord uses a valve on the A/C hardline where a user can connect a A/C refill can. Following directions on the refill bottle will show how much Freon is needed to pressurize the system.
my 1993 accord doesnt have spark
The idle adjustment screw of the idle control valve is what needs adjusting. Either opening or closing the valve moves the throttle plate and adjusts the idle.
1993 honda accord is obd1 not obd2