Answers.com > Wiki Answers > Categories > Cars & Vehicles > Auto Parts and Repairs > Transmissions and Drivetrains > Clutches and Flywheels > How do you adjust your clutch cable on a Honda dream?

How do you adjust your clutch cable on a Honda dream?

In: Clutches and Flywheels, Honda [Edit categories]

Answer:

loosen or tighten the nut at the bottem of the cable on the engine until there is less then 1/4 inch of play between the clutch lever and the part that attaches the lever to the handlebars, this can also be done with the finger adjuster on the lever if it is not worn too bad. Hope this helps

First answer by ID1656809551. Last edit by ID1656809551. Question popularity: 26 [recommend question].

[report abuse]

Can you answer these Clutches and Flywheels questions?

	Where is the clutch damper and firewall?	Answer it!
	Why cone clutch use?	Answer it!
	What is that sound when you engage the clutch?	Answer it!
	What does a clutch plate do?	Answer it!
	How many engine flywheel positions does the flywheel stop?	Answer it!

Relevant answers:

How do you adjust the cable clutch on a Honda civic?
you should see a little knob near the front of the engine, slightly to the left of where you put in the oil it'll be connected to a cable that goes underneath, that'll be the clutch cable, turn the...
Can you adjust the clutch on a Honda s2000?
yes, behind the clutch pedal there's a push rod with a 12mm nut on it, loosen the nut and twist the rod until you get the desired clutch engagment.
What do you do if the clutch cable will not adjust on a harley?
It depends on the year and type of Harley, but on a late model Big Twin if the clutch cable can't be adjusted it can mean one of several things, the worst being a fried throwout bearing. If there's...
How do you convert a cable clutch to a hydraulic clutch in a Honda?
www.hasport.com has clutch master cylinder adapters. Here is the info from their page: "The new master cylinder adapter allows the use of a Honda-style or Wilwood clutch master cylinder to convert...
How do you adjust the clutch cable in a 1991 Jetta?
if your problem is a sloppy pedal......... then you probably need to bleed the slave cylinder, not adjust the clutch cable.