0
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you get a hydraulic clutch on a 1986 C1500 working?
try to bleed the clutch
How do you adjust clutch on escort zx 2?
It is a hydraulic clutch. No adjustment. Can bleed air out of the system to get it working again. If you need info on that I will supply it as soon as you ask again that you want to know how to bleed the clutch on an escort zx2
Could there be anything else wrong if you bleed hydraulic clutch and have pressure but wont go in gear?
If you have bleed the system and If it will not go into gear with the engine running, the clutch pressure plate may have failed.
How do you adjust the clutch on a 1997 Subaru?
It probably has a hydraulic clutch so you will have to bleed the air out of it.
How do you adjust a hydraulic clutch for a Chevy Cheyenne?
You can't, It is not ajustable.The clutch slave cylinder may be bad CHECK. could have air in system. BLEED system are the clutch parts are worn out. Replace clutch parts and TURN flywheel.
How can you bleed the hydraulic clutch on my 88 bronco 2?
Dumdassesssssssssssss!
How can you tell if your hydraulic clutch is goin?
Bleed system and then see if pumping clutch is necessary for proper operation. Keep in mind that there is a master cylinder and slave cylinder.
How do you bleed hydraulic clutch 92 rodeo?
pray like hell
How do you bleed a hydraulic clutch on an Audi 4000?
The rubber gasket failure.
How do you bleed the hydraulic clutch on a 2000 Saturn SL2?
unfortunately Saturn went out on a limb to produce easy swappable parts in their cars. the clutch hydraulic system can not be bleed. it was intended on being replaced as an entire unit, filled with fluid and bleed at the factory. I've made many trips the salvage yards to obtain a entire assembly.
What causes a 1994 suzuki intruder cable not release for changing gears?
Do you mean that when you pull in the clutch it won't disengage? The Intruder has a hydraulic clutch. It's usually because you need to bleed the air out of your clutch system or that your hydraulic fluid (DOT 4 brake fluid) is very dirty. You do this the same way you would bleed the brakes. George in Seattle
How can you bleed a Rover 400 1998 hydraulic clutch?
The Hydraulic clutch fitted to the rover 400 is a sealed unit and the only thing that you can do is to replace the complete unit
