To replace a mechanical fuel pump, remove the inlet and outlet lines at the pump. Use a plug to stop the flow of fuel from the tank. With the correct size socket wrench, remove mounting bolts. Then, remove the pump from the engine. Clean the old gasket material from the engine block. Apply gasket sealer to the mounting surface on the engine and to the threads of the mounting bolts. Install the new gasket, then position the pump by tilting it either toward or away from the block to correctly place the lever against the cam. If the pump is driven by a pushrod, the rod must be held up to permit the rocker arm to go under it. When the pump is properly positioned, there should be an internal squeaking noise with each movement of the pump. Tighten the mounting bolts firmly. Attach the inlet and outlet lines, start the engine, and then check for leaks.
Information was obtained from www.autozone.com
The 89 Camry has an electric fuel pump mounted in the fuel tank. You must remove the fuel tank in order to change the pump.
How do you change a fuel injector on a 1988 Toyota Camry
On a 1989 Toyota Camry, the fuel tank capacity is 15.9 gallons.
See related links below.
The fuel filter on a 2003 Toyota Camry is changed by removing the fuel line from each side of the filter and detaching it from the vehicle's frame. A new filter is then put into place and the fuel lines attached.
Usually it's realy close to the fuel tank, under rear seats.
Where is the location of the fuel pump on a 1987 toyota camry wagon
Recommended fuel for Toyota Camry is unleaded regular with up 10% of ethanol.
underneath the air filter box on the driver side wheel well
The fuel filter in a 2006 Toyota Camry is in the fuel tank. There is an access plate under the back seat to get to the tank.
Yes, this generation Camry is a Fuel-injected engine.
How many gallons does the fuel tank of the 2007 Toyota Camry hold?
The 1987 Toyota Camry does not have a carburetor. It is fuel injected.