If it's the guess watch with the 6-notches on the back, try using a scissor where the tips fit into two of the notches opposite each other. Be careful and twist the lid counter-clockwise. I did it with my guess waterpro watch and it's a great method where you don't have to go to a repair place to replace the battery. Save your money.
This may be either easy or hard.
Some watch backs can easily be popped off or removed by taking out some screws, after doing that replacing the battery is fairly obvious.
Some watch backs however need specialized tools that only a jeweler will have. Leave these to the jeweler.
The wrist watch stopped ticking because the battery ran out.
A battery-operated wrist watch is a closed system. A wind-up wrist watch is an open system.
The battery in a wrist watch is replaced by removing the retaining screws and prying the bottom off. The battery is then slid out of place and a new battery put in.
The back pops off on some watches. You can go to a watch store and they can put a new battery in it for you. Some others don't need a battery though. On these types when you move your wrist, the time is updated.
Via a wound spring or a battery.
1H3ROb jnrcgquxjdck
in most cases you have to go to a watch repair and let them open it. The internal parts are tiny, and the battery isnt usually an off the shelf one
If the buttons on a 3 button digital wrist watch are corroded then it is almost impossible to change the date and time without having the watch fixed.
It means that it most likely needs a new battery which can range in price dependent on the manufacturer of the watch.
it's a watch with a mechanical movement that is kept wound by the movement of the wearer's wrist as opposed to a quartz watch that needs a battery to work.
It depends...If it is a digital watch look at your book. If it is a nice watch, pull out the dial and turn...
It's a no can do