Answers.com > Wiki Answers > Categories > Cars & Vehicles > Asian Cars > Toyota > How do you change a head gasket on a 1993 Toyota pick up?

How do you change a head gasket on a 1993 Toyota pick up?

In: Toyota [Edit categories]

Answer:

Take the head off and replace. However make sure to use new head bolts when buying and replacing a head gasket and find some litterature on the correct lbs of torch and sequence for your head bolts. You will also need a torch wrench for proper torch. Your part provider should be able to sell you the correct head bolts for your application

First answer by ID0402815688. Last edit by Mymustange. Contributor trust: 5 [recommend contributor ]. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Toyota questions?

	How many kilometers cay you travel on 1 litre of fuel with a Toyota Conquest?	Answer it!
	Who is the girl in the Clearwater Toyota commercial?	Answer it!
	How many sump filter in automatic transmission?	Answer it!
	What Is Toyota Belta Wheels And Tyres Specifications?	Answer it!
	How often should the cam sensor on a Toyota sequoia be replaced?	Answer it!

Relevant answers:

How do you change a head gasket on 1993 Oldsmobile?
You will need to strip down everything off the top of the engine to get to the head gaskets. A couple of tips on the job: Have the heads checked for cracks at a machine shop. When I did the job on my...
How do you change the head gaskets on your 1994 Toyota pickup?
take it to some one that knows how, or get a book on it. but i tell you it is hard, and if you mass up all the money you spent on the part is gone and truck won't give you know work cause if bolts...
How do you change the ignition lock on your 90 Toyota pick up?
I changed one on my brothers 94 4-runner The lock was screwed to the steering collum with 2or 3 screws, that had no heads, (or no hex or screw drive on the heads). Aparently the scews were run in at...
What is the top speed of a 1993 Toyota pick up?
105 MPH for 22re manual trans
How do you change the headlamp in a 92 Toyota pick-up?
On the 93 the two top screws are are visable and easy to remove. To get at the two botom onea you have to remove/loosen some of the plastic grill. Then just unplug and reinstall. New but related...