First take a picture of the belt layout or draw a diagram. Next locate the belt tensioner, it should be located right next to the Power Steering pump. Use a socket wrench with the appropriate size socket and turn the tensioner counter clockwise until the belt is loosened and remove belt. Then put the new serpentine belt on in the same order as the diagram or picture. The tensioner will be the last step of the belt placement. If you put the belt on correctly you should not be able to put the belt on the tensioner. At the point use the socket wrench and turn counter clockwise to loosen, this will allow you to place the belt on the tensioner. Hope this helps, good luck
diagram for serpentine belt on 1996 Pontiac Bonneville se
what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville
http://www.modifiedlife.com/1993-pontiac-bonneville-car-stereo-wiring-schematic/
210
on the bottom side of the engine.
200 km/h.
4x6
How to override the security system
There could be several reasons why a 1993 Pontiac Bonneville keeps dying. A couple of reasons could be a dirty air control valve or bad spark plugs.
www.autozone.com is a wealth of information with pictures, too.Click on the left side where it says Repair Info. Select 1993, Then Pontiac, Then Bonneville, then water pump. It helped us.
yes
noooooooooooooooooooooooooo