0
1) You will need to open the rear swing door. 2) On the inside jam there are two torx headed screws (T-15's if I remember correctly). 3) Unscrew the two torx screws. 4) The light is now held by two mounting tabs (small spherical headed plastic sets that go through a rubber grommet). 5) You will need to pry the light casing off (easy pressure with a good size flat head screw driver will do the trick). 6) The lilght bulbs are twist mount settings inside the light casing. 7) Twist out the mount setting, change the bulbs, and reset the light mountings. 9) To put the light casing push the light casing back on and put in the screws.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you change the rear taillight bulbs and or get the taillight lens off on a 2006 Jeep Liberty?
The 2006 Jeep Liberty rear tail light lens does not come off. The tail light is seal. You can access the tail light lightbulb through the back of the tail light, in the cargo compartment.
2003 Jeep Liberty parking lights?
replace rear tail light bulb
What is the part called on a Jeep Liberty 2005 that holds the passenger brake and tail lights?
Tail light lens, or assemble.
How do you change the taillights on a 2004 Jeep Liberty?
there are 2 torx head screws that hold the tail light on. you will need to open the back gate to get to them. then there are two snap connectors that hold the tail light to the body. you will need to pull straight back torward the rear of the jeep to get these to come loose.
Will the tail lights from a 2004 Jeep Liberty fit on the 2006 Jeep Liberty?
yes
How do you replace a Jeep Liberty tail light?
Trying to replace passenger side tailight on a 2002 Jeep Liberty. Cannot disconnect the plug and the replacement connector looks different from the original! Thanks Jim
What is the correct screw driver head and size for Jeep Liberty tail light assembly bolts?
TORX T-15
How do you change the High Mount brake light on a 2004 Jeep Liberty?
Just unscrew the two hex screws.Pull tail light out.locate bulb assembly and twist then remove bulb.Replace new bulb.Put back in reverse order.
How do you change the drivers side tail light bulb on a 2006 jeep liberty?
2006 Jeep Liberty tail light bulb lamp replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Is it legal to remove middle tail light on jeep?
No
Change a light bulb in a 2002 Jeep Liberty rear drivers side tail light?
There is a single screw that is easy to remove. The trick after that is to take a screwdriver, wrap it in a cloth to avoid chipping your paint, and pry off the light cover. It will feel very tight, but it will pop off and can be easily put back on.
Where can I buy a 2000 Jeep grand Cherokee bulb holder for the tail light?
There are a few locations as of 2014 where you can buy a 2000 Jeep Cherokee bulb holder for the tail light. This can be purchased at Parts Geek, Jeep, and Auto Zone.
