This answers is accredited with thanks to golfguy at http://www.206info.co.uk/ForumsPro/viewtopic/t=19256/highlight=clock+bulbs+chang%2A.html
dead easy!
1/ Push backwards on the cover over your clock - this will pop out towards the windscreen.
2/ You will now be able to see your clock. look for a Trox screw in front of the clock - remove this and you will be able to lift the clock unit out (can be done with a normal flat head screwdriver).
3/ Disconnect the wiring on the back.
4/ Twist the bulb on the back of the clock unit 90 degrees, and the bulb will pop out.
5/ The bulbs are roughly a quid in your local motabitz or wherever, pull the old one out of the casing and put the new one in.
6/ Repeat as necessary and reassemble.
Done!
Also...
The cover comes up and out complete with the hazard warning button. No need to disconnect this.
The clock unit takes 3 bulbs.
They are a push fit into the white bayonet plastic bolder and old ones can difficult to remove.
Make sure new bulbs have wires making contact with holder.
You will need to reset the clock unit language and date/time when you reconnect it.
Good luck!
how can i change bulb
how do you change the brake light bulb on a Peugeot 3008 Halfords cant figure out how to get access
how do you change sidelight on peugeot partner van
You cant you have to buy a bulb for it
If you are talking about the digital clock you must first remove the dash bezel, couple of screws then it pulls out and up. 3 screws to remove the clock assembly, unplug it 1st. Turn the clock around and on the backside is a gray bulb socket, twist it off, then pull on the bulb to remove it from the socket.
As the climate change bulbs
it is impossible
dont
not onclock
Find the dashboard.
hand use pannithan
The room lp, which is a fuse 10 A, controls the digital clock in a 2011 KIA Sorrento.