Answers.com > Wiki Answers > Categories > Cars & Vehicles > Asian Cars > Suzuki > Suzuki Forenza > How do you change coolant in a 2005 Suzuki boulevard c50?

How do you change coolant in a 2005 Suzuki boulevard c50?

In: Suzuki Forenza [Edit categories]

Answer:

take off the coolant fairing. This is located directly below the built in tool box on the gear shift side. You will need to take off the tool box fairing as well. The coolant fairing is fastened with three Allen head bolts: one on top and two on bottom. There appears to be an Allen head bolt easily seen on the outside of the fairing. this is just a beauty bolt.

To drain the coolant you need some form of siphening kit or tube. There is no drain plug. Put in new coolant, replace fairings, and you are ready to go.

First answer by ID1662069431. Last edit by ID1662069431. Question popularity: 60 [recommend question].

[report abuse]

Can you answer these Suzuki Forenza questions?

	How wide is the trunk on a Suzuki Forenza?	Answer it!
	What is wrong if your car is making a clicking sound as you accelerate but only when the engine is cold?	Answer it!
	How do you make incident report?	Answer it!

Relevant answers:

What mpg does the 2005 suzuki boulevard c50 get?
Looks like it is in the 50 mpg range ->...
How do you check coolant on a Suzuki Boulevard C50?
On the lower left hand side of the motorcycle is a chrome plated plastic cover, this is right behind the clutch cable. You remove the three Allen screws with a wrench in your motorcycle tool kit....
Where is the fuse box for 2005 suzuki boulevard c50?
Two of them: Under the saddle is the main panel. Left side rear panel (below the emblem. Inside is a second fuse box.
How do you change the coolant in a Suzuki Intruder?
the easiest way is to removed the clamp off the lower radiator hose from the engine and let it drain, once drained replaced hose and clamp. you may have to removed the radiator cover to access the...
How do you change coolant suzuki swift?
take of the engine fluid cap and there will be a green or blue rubber pipe with a little rubber csp on. if you just pul off the cap you can put the coolant down there bit by bit but only do it when...