1-remove mower deck. 2 disconnect elect. clutch 3 unbolt pulleys from crank shaft. 4 remove belt from idler pulley behind steering plate. 5 pull upper crank pulley down about one inch remove belt .6 install new belt reassemble pulleys
Not sure I'd recommend trying to lower the pulley. I ended up buying a pulley puller and still bent the pulley. And it didn't just break loose and come off - I had to use the pulley puller all the way down the crank shaft. Next time I am going to try undoing the engine bolts and sliding the engine back an inch or 2.
Changing a driver belt on a Cub Cadet CC 1023 RD can be quite the challenge. You will have to take off the deck, take off the old belt, put the one belt on by placing it over the transmission and then over the puller gears.
how do you change drive belt on a ltx 1040 cub cadet
please let me see a diagram of this
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
You can replace the drive belt on cub cadet RZT 50 by first making sure that the engine of the vehicle is turned off. Then you can pop open the hood and remove the belt.
Dont know either
A-sect V belt 1/2 by 78 part # 954-0461
It's right on the deck
No the drive belt and Deck belt are two different belts, one powers the rear wheels, the other powers the deck. though if you are asking if they are the same belt as in same size, I don't know, you'll have to check your owners manual or talk to someone who repairs or can get parts for Cub Cadet mowers.
how to change the drive belt
Which one? Blade = 754-04033 Transmission = 754-0461
How Do I change A drive belt on a John Deere LT190?