The mower should be drained of gas and drain the motor oil before starting procedure.
Disconnect spark plug wire from spark plug.
.
Motor side of the belt:
.
Remove two bolts under the lawn mower body which holds the top cover over the drive belt.
Remove the belt guard that is around the pulley on the crank shaft.
Then work the belt around the blade and off the the drive pulley.
.
While blade is removed, sharpen or replace as necessary.
.
Transmission side of the belt:
.
Remove the "S" clip on handle for speed / traction cable
Remove the plastic "Rear Baffle" two screws on each side on frame in front of rear wheels one screw in the rear
.
With the baffle removed, rotate the drive shaft and transmission to gain access
to the pulley drive belt guard, it is held in place with three screws.
.
Once belt guard is removed, you can easily remove the drive belt
.
Reverse procedure to replace the belt.
.
Lubricate drive Axel bearings, wheel bearings, control cables, as necessary.
Replace all fluids as necessary.
You can change the drive belt, on your lawnmower, by loosening the tensioner pulley. With the tensioner pulley, loosen the drive belt will come off and can be replaced.
We will need some more details... Is it the drive belt or the belt for the blades?it is the drive belt for Murray lawn mower model 38618x92a
How do you replace a mower deck belt on a stx38 hydro
There is usually a deck belt and a drive belt.
need a quick reference guide on diagram of belt drive for a l120 john deere lawn mower
Where can we find a simplicity riding mower model 284707 belt diagram
Mow the grass,Mow the garden.
How long is the drive belt
You need to remove the underdeck to replace the belt.
i need a diagram for installing a belt on a john deere lawn mower 330
NOT INSTALLED PROPERLY? CARB ADJUSTMENT?
Not an easy task. Never had to remove steering rods and break shaft set up to install a drive belt on a mower before.