It is not necessary to remove the entire grill, just the chrome trim piece that extends across both head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim piece. Be VERY careful in doing this as the chrome piece is very brittle & easily broken or damaged. Once you have the trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. After removing the 3 bolts, pull the headlight forward to dislodge the lower retaining tab which is on the opposite side of the headlight housing from the lower bolt toward the rear of the housing. Once you have the assembly out, accessing the bulb is simple!
This is not the easiest job to do, so it is a good idea to take painter's tape & protect the paint on the bumper & fender as well as the clear, Lexan part of the headlight assembly.
Take your time, be careful, & you will get it right the first time!
*******************ANOTHER OPTION****************************
For replacing the RF headlamp bulb without disaligning the lamp's output beam:
Open the hood and remove the air intake assembly to access the back of the headlight housing; from here, you may reach the "bulb" by untwisting the coupling that holds the bulb in place. Afterwards you may release the harness/socket through the press-in tab that secures the bulb. Total time needed: 30 minutes.............a single bulb runs about $9 at most auto parts stores.
How do you change the fog light on a 2005 Chevy Equinox?
2005 Chevrolet Equinox headlight bulb lamp replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
To change headlight bulbs in a 2005 Ford Escape, first make sure the light switch is in off position and replace the passenger light bulb. Next, get to the driver's side bulb, remove the battery by holding it down, to be able to change the headlight bulb.
getting the headlamp assembly to slide out to access the insert for the bulb is tricky
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
See your user manual, its great for basic maintenance info
How to change headlight bulb 2011 ram 3500
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
To change the headlight bulb on a Pajero Shogun, open the engine compartment hood. Locate the back of the headlight and twist the bulb off. Replace with new.
You cannot replace the headlight bulb. You need to buy a new headlight unit.