If the bulbs are the same as a 2003 Deville, there are two bulb containers above the license plate light and you just need a small screw driver to press in under the left side of the plastic bulb housing to release the plastic clip. The plastic bulb holder will swing from the right hand side and will then fall out. All you need is a medium size flat head screw driver.
I had to unscrew the housings with a Philips screw driver and take the housing out of the hole, by turning it sideways and pulling it out. The i turned out the bulb holder from the back of the housing and pulled out the bulb.
what is the number for the fuse to change the rear license plate light. and is it the fuse box under the back seat or under the hood? The plate light is protected by the parking/tail light circuit.
The size of the screw needed to mount a license plate on a 1998 Cadillac STS is 1/4-inch?æby 1/2-inch. They make license plate kits that includes all needed hardware.
There is a plate under the car on passenger side. Remove this plate and you will be able to see the alternator. I think it has three bolts.
How do you change the lamp on the license plate of a lincoln ls 2000?
You can purchase Cadillac license plate frames online at either Amazon or eBay. You might also want to check your local car retailer, the usually can order them at the manufacturer and sell them to you.
how do you change the light bulb over the license plate on 2000 eclipse
No. The licence plate cannot be altered.
how do you change the rear license plate light on a 1999 Buick Regal
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300
No there will be additional charge for getting your license plate changed
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.