answersLogoWhite

0


Best Answer

If it is the top hose and you are not changing all your anti-freeze drain the anti-freeze down until it is below the thermostat level and loose the clamps and take a razor knife and cut a couple of vertical slits on the hose where it goes around the radiator nipple and thermostat housing. Remove hose and put new hose on, some trimming(shortening) the hose maybe required since some manufactures have it slightly long so it will fit several models. Same deal on the lower hose but you have to completely drain your anti-freeze.

AL

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change radiator hose on a ford E 250 van?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the thermostat located on a 1997 Ford F-250?

The thermostat on a 1997 Ford F-250 is located under the upper hose assembly in the radiator. To locate the thermostat, drain the radiator halfway and remove the hose at the top of the radiator.


Where is the thermostat on a 2000 ford f 250?

follow top radiator hose from radiator to engine and t-stat will be in the housing that the hose connects to.


How do you replace a thermostat on a 2000 Ford F-250 V10?

To replace a thermostat on a 2000 Ford F-250 V10, drain the radiator. Locate the thermostat on the top hose assembly and remove the screw. Replace the thermostat and refill the radiator.


Where is the thermostat on Ford F-250 Power troke diesel engine?

Should be in a removable housing at the engine end of the upper radiator hose


Where is the thermostat in Ford E-250 van?

If you have the 4.9L engine it it located on top in the front of you engine. Best way to find it is to follow the top Radiator hose from the radiator to the engine. It connects to the thermostat housing!


Where is the thermostat located on a 1997 Ford F-250 power-stroke?

follow the top radiator hose from the radiator to the top of the engine. the bracket (for lack of a better term, I'm not sure what the technical word for it is) that the radiator hose is connected to on the top of the engine is the thermostat's location. it's located under that bracket. two bolts hold that bracket on.


Where is the Coolant sensor location on a 1995 ford econoline van 5.8L F-250?

Next to the lower radiator hose where it connects to the water pump. You need to get under the vehicle to see it


Where is the thermostat on a 1999 dodge ram 250 van?

Should be in a removable housing at the engine end of the upper radiator hoseShould be in a removable housing at the engine end of the upper radiator hose


How do you change the fuel filter on a 2005 F-250 ford?

you got to buy a fuel hose removal tool from auto parts store, stick end of tool in hose by filter and press, this unlocks ring that holds hose to filter........good luck.......b


How replace Thermostat 1995 Ford F-250?

To replace the thermostat on a 1995 Ford F250, the non-working thermostat must be removed. The radiator hose must first be removed, then the non-working thermostat unbolted from the intake manifold. The area needs to be cleaned of any old seals and debris. The new seal needs to be placed in on the intake manifold. The new thermostat is then placed on top of the new seal and secured. The radiator hose is then reattached.


How do you change a distributor on a 1989 Ford F-250?

how do you change out the distributor assembly on a 1989 ford f250


How do you know if your fuel pump not working in 1983 ford 250?

how do you know if your fuel pump not working 1983 ford 250 an how do you change it