You have to remove the black belt cover between the engine & shoot held on with 2 bolts.
Next you will need to separate the auger housing from the unit.
This is done by removing the 2 bolts just below the black belt cover
now you have access to both the drive & auger belt.
Upon resembling make sure when the 2 units go back together that you have the notices on both sides on the bottom of the unit together.
service manual unit John deere
To fix a bent auger on a snowthrower try to bend it back in place. Use a hammer and slowly and gently tap it back to its original shape.
Deere"s number for the auger is #M123224 and drive is #M110637 which is 31" x 1/2" and 30" x 1/2" respectively.
John Deere did a lot to help us by inventing things that better our lives today. Some of his inventions are the mower, tractor, auger and much more. Not only did he invent it but has also perfected it.
removeaugerassyonmtdsnowthrower
There is a serial number break on that machine at #140001. Below that both belts are: M82612 36.22" X 1/2" And after that: M122421 37" X 1/2" for the auger and M118011 33" X 3/8" for the drive
To adjust the auger blts on a spirit snowthrower: The adjustment is on the cable to the handle, remove the cable by lifting the belt idler to relax it enough for removal. Turn the adjustment screw going into the spring and re-attach. This will increase the tension on the belt and you should get performance you are seeking. It might take a couple of tries to get the tension you want, but it's an easy fix.
Auger Rental is not a company. An Auger rental is when you rent an Auger. Here is a website where you can rent or buy an Auger from: http://www.equipmentland.com/categories/diggers/index.shtml?gclid=CM2tt5669akCFYhd5QodekoYVg
Edmond Auger died in 1591.
Edmond Auger was born in 1530.
Athanase Auger was born in 1734.
Michel Auger was born in 1944.