Remove wheels Re-install 2 lug nuts to hold the rotor in place Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to retract piston into caliper body Replace inner and outer pads...
On the 5.2, there should be a serpentine belt on it. There is a belt tensioner on the passenger side. It is a small wheel with a 15mm bolt on it. Put a wrench or socket on it and turn it clockwise....
remove wheel
remove brakes/caliper/caliper bracket/rotor
remove cotter pin/axle nut
remove 4 bolts from wheel bearing assy
unplug electrical connector for ABS, if has it
tap axle end lightly to...
Check engine light off, codes cleared; cold start.
-warm up engine 5 minutes (or until closed loop is reached--5 min is usually plenty)
-drive (w/ steady throttle) at a steady speed between 40 and...