Pull the old one out and put a new one in Easy. Find it.
If you have been using a pleated filter for a long time, 2-8 years plus, with no problem, then you are keeping your coil clean so stay with a pleated filter with the same Merv rating. If you have a metal or plastic electrostatic filter that you are washing, then you should change it to a pleated filter. You can never get the electrostatic filter clean enough and they restrict your air flow when they get dirty which will cause your electric bill to increase.
the oil filter is on the back of on engine just below the inlets it,s not easy to get to just go to kwik fit a oil change plus filter is only £40 and well worth it to help save the life of your turbo it cost us £600 for a replacement turbo because we didn,t get a regular oil change plus filter
Fuel filter is integral with fuel pump. Why would gm do this stupid change so now if filter blocks need to change pump and all. for $300 plus labor instead of $10 dollars and 10 minutes of labor
yes
4 quarts plus the filter. 4 quarts plus the filter.
It is 96% iron (the rest is mostly sulphur etc.).
They dont put one on because of a maintenance and money issue. You need to change filter when you change fluid. Plus many folks would think that is a job for the stealership...
The "B" represents an oil and filter change plus mechanical inspection, while the "1" means it's time for a tire rotation.
AnswerIt takes 5 quarts plus oil to fill a replacement filter, if necessary (which i do every oil change)
3.5 liters
Yes. Specially if you have a 90%plus condensing furnace. This furnace has two heat exchangers, which means that it uses the combustion chambers radiant heat as comfort heat, if the furnace is matched with a 2 stage or modulating gas valve, the savings can be between 40 to 60 percent savings on utility cost.
Change the icon in the application's resource file, then recompile.