How do you change the fog lamp bulbs on a 2003 Acura TL?
[Edit]

Answer

Locate the hole in the bottom of the bumper that is situated in line with the inside corner of the foglight. You'll need a 10mm socket and an extension for your socket wrench (I actually ended up using 2-3" extensions). Unscrew the bolt inside and remove the bolt. Use a flat head screwdriver to help pry the fog light housing out of bumper. Easiest to wedge the screwdriver between the inside edge of the foglight and the bumper (i.e. the side away from the tires). Also, wedge your hand through the air dam and help push the foglight housing out. It should pop out fairly easily.

Undo the connector to the bulb, unscrew the bulb from the housing (just a small turn), and reverse the process to put in the new bulb.

Hope that helps.

Improve Answer Discuss the question "How do you change the fog lamp bulbs on a 2003 Acura TL?" Watch Question

First answer by ID1248807339. Last edit by ID1248807339. Question popularity: 36 [recommend question]

Research your answer:

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Acura > Acura TL > How do you change the fog lamp bulbs on a 2003 Acura TL?

Our contributors said this page should be displayed for the questions below. (Where do these come from)
If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.
Fog lights for 2003 acura tl?  How do you replace fog lights in acura tl?  How do you replace fog lights on 2002 acura tl?  How do you replace the fog light of an acura tl?  How do you replace fog light bulb on 02 acura tl?  How do you change fog lamp bulbs on 2003 Acura TL?  How do you replace fog lamp bulbs on a 2003 acura TL?  How do you change driving lamp bulbs on 2003 odyssey?