Go here for complete pictorial instructions: http://www.matthewsvolvosite.com/chat/phpBB2/viewtopic.php?p=50801#50801
$300
how do you change the front brake rotor on a 2001 highlander?
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
It can be easy to change the brake rotors. Lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe, tire and lower the car.
It is important for a person to learn how to change the brake rotors. A person needs to lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe tire and then lower the car.
how do you remove the rear brake rotor on a 2000 Volvo v70 awd
all you will need is to find rotor size because front and rear rotors are different and check wheel size volvo"s have rotors sizes for different wheels packages disconnect battery find level ground jack up car remove wheel check brake remove caliper bolts remove rotor pin on rotor take a hammer knock old rotor loose check em,brake clean area from old brake dust reverse process
dodge caravan front brake rotors should come off after removing the brake caliper. first check for any hardware that may hold the rotor in place, then hit the rotor with a hammer, in between the wheel mounting studs. (not on the area where the brake pads make contact. this should knock the rotor loose. good luck.
You remove the wheels, remove the brake caliper and the rotor is then free .
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
You remove the brake caliper frame and rotor is then loose.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.