first you will need a 3/4 socket to remove the wheel then you will need a 14mm socket and wrench to remove the bottem bolt of the brake caliper after that the brake caliper should swivel upright and you will need a 9 inch c clamp to compress the caliper pistons back into the caliper the brake pads will slide out slide the new pads in and swivel the caliper back down and put your 14mm bolt back in to the proper tourque spec bleeding the brakes is also recommended put the tire and rim back on and be sure to pump your brakes and check your break fluid before test driving the vehicle
http://rkrenn.com/xterra/howto/bearing/bearing.htm This link get you past the pads, rotors all the way down to the bearings.
No only should be done when your pads are changed.
Maybe is the fluid brake that is low level.
Change front brake rotors on a 1998 Hyundai Accent?
Change the brake rotors
How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra?
To change front rotors on a xterra u have to remove the brake caliper and brake guard off the rotor and then remove the gold cap off the hub and unscrew the two screws holding the wheel bearing in then unscew the holding plate that holds the bearing remember which way the holding plate goes when taking off... then remove the hub and the rotor comes with it ... then the screws going around the hub on the out side remove theses and the rotor comes off .. but i also suggest repacking the wheel bearings and replacing brake pads pads with the new rotors ...
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
yes but depends how big the rims are
Yes.
remove the brake caliper and the rotors come right off
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.