How do you change the front marker light on a 2003 infinity G35?

Answer 1

For housings:

1. Google DIY Headlight removal G35

2. Follow the guide.

Quick rundown:

1. Remove front bumper using the appropriate tools.

2. Un-bolt the headlight housing, detach all plugs/wires.

3. Reverse to complete.

For bulbs :

Google it. There's a complete DIY guide with pictures on how to do it.

Quick rundown:

1. (Optional) Lift the front of the G35 and place it on jack stands. Remove both front wheels, place them under the car if you don't have jack stands.

-If you don't do this then turn your wheels to which direction giving you more space to fit your arm through the fender-

2. Remove fender lining using a flathead screw driver.

3. Stick your arm through and make your way up to the headlight and blindly feel for the bulb. Once you find it, un-plug it as you would on a normal car and remove the bulb as you retract your arm.

4. Do the same thing to put in a new bulb being very cautious as to not damaging the new bulb on anything.

5. Repeat on opposite side if necessary.

6. Reverse the removal of everything to complete.

Answer 2

How do I replace a headlight bulb on a 95 G20? Disconnect the OEM connector on the back of the bulb by pushing in the tab with your thumb and then pull it off. Then turn the bulb locking ring counter-clockwise to disconnect it and slide it back over the bulb. Then pull the bulb straight out to remove. When you put in the new bulb, it has to line up with three tabs in the hole in the back of the headlight where the bulb goes in,when you line it up correctly,the bulb will slide in all the way,when you have got it all the way in you will have the O-ring on the bulb in the headlamp hole. Then you put the locking ring back on and reconnect the OEM wire.

Answer 3

if your talking about the side marker it just pulls out and twist the bulb off. simple. its just a clip that holds it in.