Open the hood, get to the back of the light, remove the rubber cover and the light is visible. Turn the light bulb housing and pull the bulb out. Installing is the reverse.
If you are referring to the headlight, it is quite easy and you don't need any tools.Open the hood and remove the rubber cap behind the headlamp assembly, turn the connector about 1/3 turn...
headlight bulb?..........push big tab on the black bulb cover and take it off........you see wires and connector....... wiggle and pull connector (not the wires) off the bulb terminals...... a metal...
Empty the glovebox contents
There are tabs on the back corners that keep the box from opening too far - pull those in and release it to fall down.
You should now have room enough to get at the...