tools u need. 7mm socket-#15 torx and a #2 Phillips.
First drop down glove box and remove 2 screws beside stereo panel. Pull from right side and remove stereo panel. Remove screws from where your glove box closes and one more that was hiding behind stereo panel. At the side of the dash where the fuse panel is you need to remove the Phillips screw from there and also on the passenger side as well. Remove both of those side panels and remove metal strip around glove box area to expose other screws to remove. pull out panel cover on the dash for your front defroster and you will see 3 more screws to remove. once removed pull up on front trim. (closest to the windshield) and remove out of way. Continue to remove all visible screws and the gold coloured bolts by the windshield. When all this is done, grab the dash from both sides and pull out and then up. The cluster is held in place with 2 black screws only do not remove the little silver ones. When the screws are out from the cluster, pull toward you and up. Look at back of cluster and there are your bulbs. Turn and pull out and replace. It takes me about 45min start to finish all back together, first timers maybe longer.
check your fuses first, then check your bulbs and then your relay.
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
Check the bulbs, check the fuse then check the switch.
in the rear facia, under the trunk lid there is 9 bolts holding the facia on. You must remove the nuts and pull the facia out and right above the license is the two bulbs 194. replace the bulbs and put the facia back on and you are on your way.
You have to remove the dashboard, then remove the instrument cluster. On the back of the cluster, you'll find that you can unscrew the bulbs from the back and replace them. I've done it myself on my own 99 Sunfire --- CanadianCynosure
Epic Failure.
Bad switch? Bad relay/ Breaker tripped?
Changing the instrument panel lights require removal of the dashboard. With the dashboard removed pull the gauge cluster out and take off the bulbs. Install the new bulbs.
I can't be 100 % sure as I'm not real familiar with your model, but my earlier Sunfire's bulbs are accessed from inside the trunk, You'll have to pull the carpet away from the body, then twist out the bulb holders.
To change the dash light bulbs you must remove the instrument panel.
we can change it through decreasing its value.
I'm guessing that all of the light bulbs have been checked and are good. It's possible that you need to replace the flasher.