Two screws hold the lamp assembly to the rear bumper cover. Only one needs to be removed completely, the lamp assembly has a slot for the other screw. Once the assembly is off the bumper cover, all you need to do is twist the lamp holder a quarter of a turn to remove it from assembly. The bulb itself just pulls out. You might want a to put a little "bulb grease" in the tip of the bulb when you re-install it.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
Yes, all cars have a license plate light. It is mandated by law.
Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.
their are 4 plastic nuts in the trunk that loosen the light assembly that the lights are in. Remove those and pull the assembly out and twist the connector for the license plate light to access the bulb.
Why are ets and engine light on in 98 Chevy cavalier
open the trunk and take out the screws
NO.
It comes out the back of the light housing.
Remove the light assy and turn the bulbs counterclockwise.
how to change 2005 equinox license plate light i removed the screws but it didn't release
brake and abs light on , on 1994 Chevy Cavalier Z24
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.