you wil need an adjustable wrench adn ir Phillips head screw driver
1 open trunk
2 unscrew tacks located on the trunk carpet liner on the side in which u will be changing the bulb.
3 remove holster, and push the pins ocated on bulb gently and pull bulb out.
bad O2 sensor
Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.
Not to be unkind - but READ THE MANUAL.
were are the timing marks at
2002 galant , can't find the spark plugs
how to change front brake pads on a 2003 neon
how do i fix the problem if the tcl light comes on in a 2003 mitsubishi galant
when it doesnt work
I have the ZX5 2003 and when I did it I had to open up the trunk and go through the inside.
brake light and battery light is on
To replace the front brake pads on a 2003 Mitsubishi Galant you will only need a few tools. You will need a jack, tire blocks, a large C-clamp, and a 14 mm socket.
Where is the brake light switch for 2003 hd Chevy truck As far as I know, all brake switches are on the top of the brake pedal arm.