you have to loose the belt in order to slide it out by releasing tension on the tensioner pulley ,what you do it`s sore of a tight motion clockwise on the tensioner bolt it`ll loosen the belt and then you can slide it out, to install it do the same.
picturediagram of how to install 89 Cherokee serpentine belt
There is only 1 way the serpentine belt will go on, there is no alternate way.
You have to release your tensioners in order to release your serpentine belt. When you put the belt back on you have to follow the diagram on the hood of your car.
Have you checked at a parts store on the new belt package?
89 Buick Century uses a timing Chain. Not a belt.
on the front of the engine on the serpentine belt, it's bolted directly to the engine.
depress the tensioner pulley with a ratchet and take off the belt installation is the opposite
how do you change a power sterring belt for 89 Chevy van
Sure if you got a smaller belt that fit perfectly after bypassing the A/C. Just disconnect, or pull the fuse to the A/C and allow it to act as a idler.
1992 Chevy s10 jumps out of 5th gear
I do not think so, my 89 YJ had a normal alternator belt, but my 97 TJ has a serpentine belt, so aside from any mounting differences the drive system would be different.
Yes,