Remove the plugs one at a time and replace with a new plug you have gapped properly. Tighten to the proper torque Do not over-torque plugs. You risk damage to cylinder heads (particularly aluminum ones), and proper firing depends on the plug being at precisely the right height relative to the cylinder. I will list a link to Torque Specs. below. It is necessary to remove the upper intake plenum. Purchase the intake gaskets when you purchase the plugs. You also have to remove the coils one at a time, remove the plugs w/a 5/8" spark plug socket, coat the threads of the new plug with a small dab of anti size compound, thread the plugs in using only the socket and extension after the contact the head tighten an additional 1/16 turn.
where do I find the battery on a 1999 Chrysler sebring, can't find it in the engine compartment?
engine needs to be removed
If a Chrysler Sebring has a supercharger it is aftermarket and not factory.If a Chrysler Sebring has a supercharger it is aftermarket and not factory.
The 2.7L out of a Chrysler Sebring or Dodge Stratus.The 2.7L out of a Chrysler Sebring or Dodge Stratus.
by the engine
A Sebring is a Chrysler not a Pontiac. It can have a seperate belt depending on the year and engine.A Sebring is a Chrysler not a Pontiac. It can have a seperate belt depending on the year and engine.
The best place to find an engine diagram for a Chrysler Sebring would be in the owner's manual. If you do not have your, contact Chrysler or check your library.
100,000 miles.
No, the 3.2L will not fit a Sebring.
No,
No.
A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.