 |
How do you change the sparkplugs on a 1990 Chevy Lumina?In: Chevy Lumina |
[Edit] |
Answer
changing the spark plugs is pretty straight forward...I'll assume you're referring to the rear plugs...it is a tight squeeze...lol...A more useful answer is to undo the 2 dogbones holding the engine to the frame just above the radiator.......careful, the car will roll back!....be prepared with a crowbar or other lever hooked under the wishbone over the transmission........careful, don't bend or hit any of the cables in that area....very expensive!.....now lever the car forward and remove the dogbone bolts on the engine .....keep levering the car forward until you can put the removed bolt through the eyelet in the center of the dogbone......this will hold the engine away from the firewall and give you room to change the spark plugs......ps. always use spark plug wire pliers to remove the wires.
Answer
I take the alternator off. Then you can get to them
First answer by ID1088740082. Last edit by ID1058182661. Question popularity: 72 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Chevrolet > Chevy Lumina > How do you change the sparkplugs on a 1990 Chevy Lumina?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
