Answers.com > Wiki Answers > Categories > Cars & Vehicles > American Cars > Jeep > Jeep Cherokee > Jeep Cherokee Sport > How do you change the taillights on a 2004 Jeep Liberty?

How do you change the taillights on a 2004 Jeep Liberty?

Answer:

there are 2 torx head screws that hold the tail light on. you will need to open the back gate to get to them. then there are two snap connectors that hold the tail light to the body. you will need to pull straight back torward the rear of the jeep to get these to come loose.

First answer by ID3488289960. Last edit by ID3488289960. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Jeep Cherokee Sport questions?

What does it mean when the fuel relay and the fuel pump clicks?

Answer it!

Relevant answers:

How do you change the time on the clock on a 2004 Jeep Liberty?
There is a little hole next to the "H" for hour and "M" for minute, stick a pin or pen in there and change the time. :)
How do you change spark plugs on a V6 2004 Jeep Liberty?
1) Remove the air filter manifold. It will clip on the air filter on one side, and there will be a ring fastener on the other. 2) For the 3 plugs on the driver side, use a 10 mm nut driver to remove...
How do you change tail light bulb on a 2004 jeep liberty?
replacing brakelight for 04 Jeep Liberty. By opening the tailgate, you will see two star headed screws. you may need an extension and good lights to get to them. Carefully looses each one with firm...
How often do you change Differential fluid for 2004 Jeep Liberty?
Refer to owners manual, it will give you mileage frames on when to change fluids.
How do you change gas filter on jeep liberty 2004?
The 2004 Jeep Liberty has a "lifetime" fuel filter built into the fuel delivery module. This is located inside the fuel tank. The filter itself is not servicable. If you suspect a plugged filter, the...