answersLogoWhite

0


Best Answer

2 Options: 1. Don't attempt, because its not worth it. 2. First take of the gravel guard under the front fascia. Then take out the wheel well guard on the drivers side (all 7mm). Then you will need to loosen the front fascia from the driver side fender. 1 bolt, and 2 nuts, all 10mm. Now you can either take out the radiator, or you can just work the reservior out. Either way its going to be a pain. There are 3 bolts, and about 4 one way plastic push bolts holding the thing in. If you are going to keep using your current pump, its on the engin side of the reservior, then just lift it straight up about 1 inch. Otherwise, disconnect your battery, then disconnect the power cable and washer fluid tube from the pump. Now its time for the removal. If you are not going to take out your radiator (the better choice, since that would be an even bigger hassle) then you will need to jack up the front of the car. Now the air intake assembly will HAVE to come out with the reservior. Both will come out, not so easily from the bottom. Replace, and repeat in reverse. Have fun, I know I did.

I agree with all except you dont have to take out the air intake that is behind the wheel well guard. If you take out the screws in the bottom of the air intake you can push it out and the reservoir will slip out...not so easily but it will come out.... I also removed the 3 screws on the PCM module that is mounted recessed into the washer reservoir....you can spin the module around and get it out of the way..

Its not a fun process but it is doable.....

good luck...

Steve

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change the windshield washer reservoir tank on a 2000 Pontiac Grand Am?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the windshield washer pump in a 2003 Pontiac Grand Am?

How do you change the windshield washer pump on a 2003 Pontiac Grand Am


Where is the windshield washer motor located on a 2003 Pontiac grand am se?

It is attached to the bottom of the washer fluid reservoir.


How do you remove the windshield washer fluid reservoir on a 2004 Chevy cavalier?

2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.


Where is the container for the rear windshield washer fluid on a 2004 Pontiac Vibe?

Both washers use the front reservoir


How do you access and change the windshield washer motor pump in a 1992 Chevrolet Cavalier?

It is located in the washer fluid reservoir.


What side of the windshield washer reservoir does the front windshield washer pump go on a 2002 GMC Yukon?

The pump for the rear window is on the side of the reservoir and the pump for the windshield is on the front of the reservoir


What is a windshield washer tank?

reservoir to hold washer fluid


WHERE IS THE WINDSHIELD WASHER PUMP ON A 2002 CHEVY HEAVY DUTY PICKUP?

Mounted on the bottom of the washer fluid reservoir.


How do you get to windshield washer reservoir that is leaking and replace the windshield washer reservoir on a pathfinder?

On ours, it is behind an access panel in front of the RH tire.


Where is the windshield washer pump on a 1989 Toyota pickup?

It is located on the bottom of the windshield washer reservoir.


What happens when you put windshield washer in the coolant in Grand prix Pontiac What happens when you put windshield washer in a Ponitac?

What happens when you put windshield washer in the coolant in a Grand prix Pontiac


Where is the rear windshield washer fluid reservoir on a 2007 ford escape?

The washer fluid for the liftgate is supplied by the reservoir for the windshield ( according to the owners manual )