answersLogoWhite

0


Best Answer

You can cause the "CHECK ENGINE" light to blink the error codes.

Without starting the engine, turn the ignition key on, off, on, off, and back to on.

The "CHECK ENGINE" light will flash the first digit, pause and then flash the second digit of any stored error.

Example:one flash and pause and eight flashes = number 18 error code.

You can also try this inclusive web page that can itemize most error codes for you. To read them from the car's computer you need an ODBII compliant reader , either computer program or utility tool from most car part retailers.. ie about $200

answer1995 grand Cherokees are not ob 2 compliant listen to the first bit of information because it is correct. When you are turning the key switch back and forth 2 or three times between acc and off.

http://www.wjjeeps.com/faultcodes.htm

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you check and read the problem codes for a 1995 Jeep Grand Cherokee Laredo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What does check gauges and beeping mean on jeep grand Cherokee Laredo?

When there are beeping noises and the check gauges light on a Jeep Grand Cherokee Laredo it means there is a problem. The vehicle will need to be stopped and all of the fluids need to be checked immediately.


How do you change a speedometer on a 1993 Grand Cherokee Laredo?

did you check the speedometer gear in the tranny?


How do you check coil pack on a grand Jeep Laredo?

what is the max resistance on a 4.7 grand jeep cherokee coil pack


Why would the check gage light go on in a 1996 grand Cherokee Laredo?

Because the oil is low.


What is the little light that looks like on engine or something mean on 2002 jeep grand Cherokee Laredo?

Check engine light. It means there is a problem with the emissions system. Take it to the dealer for repair.


Your 1998 Jeep Grand Cherokee Laredo has a problem with the blower motor for the ac and heat The compressor is good and you can feel cold air it just doesn't blow at all?

The HeaterTreater is an after market kit that solves heater and AC for the Jeep Grand Cherokee and Laredo. It is much cheaper than the dealership fix and is easy to install. For diagnosis and info, check out www.heatertreater.net or search eBay for "heatertreater".


What causes the heater not to work on a 1995 Jeep Grand Cherokee Laredo?

The HeaterTreater is an after market kit that solves heater and AC for the Jeep Grand Cherokee and Laredo. It is much cheaper than the dealership fix and is easy to install. For diagnosis and info, check out www.heatertreater.net or search eBay for "heatertreater".


If my rear lights on my 1999 jeep grand Cherokee Laredo will not work but there is power going to the bulbs and the bulbs are new what do you check next?

Check the ground wire connection.


How can you fix a broken heater in a Jeep Grand Cherokee or Laredo?

The HeaterTreater is an after market kit that solves heater and AC blend door malfunctions for the Jeep Grand Cherokee and Laredo. It is much cheaper than the dealership fix and is easy to install. For diagnosis and info, check out www.heatertreater.net or search eBay for "heatertreater".


What would cause Tachometer Speedometer and battery gages not to work in 99 jeep grand Cherokee Laredo?

Loose wiring behind the dash.. Pull the cluster and check the wiring or check with the dealer they know about this problem and they may have issued a recall. Hope this helps


Hi you have a 1996 Jeep grand Cherokee Laredo V8 5.2l and the engine cuts out at any speed anybody have any answers?

bad earth . have you had or done any work under the bonnet then that could be you problem check your earths.


Your 1995 jeep Cherokee Laredo dies on you sometimes 2-3 times a day it takes a while sometimes but always starts back other times it drives fine for days without quitting what is wrong?

Check the crank sensor, i had the same problem with my 94 Grand Cherokee