answersLogoWhite

0


Best Answer

Depending on how bad the soot is on the ring you may need to try a couple of things. Many times a jeweler will need to polish the ring to get the shine back, but you can try these things first. A solution of Mr. Clean, Ammonia, and water can be used to soak the jewelry in. This is the same solution that jewelers use in their ultra sonic to clean jewelry. You can also try using a polishing cloth to remove some of the surface soot. These suggestions only work if the soot is light. If there are stones, a jeweler will need to remove the stones and polish the area under where the stones were set. Dullness under the stones will keep the diamonds from sparkling.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you clean fire damaged jewelry?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you clean enamel jewelry?

To clean enamel jewelry I would use something non abrasive and safe on all types of fine jewelry. A solution created by mixing half Mr. Clean and water then a small amount of ammonia should work great. This is the same solution used in the ultrasonics of many jewelry stores I know of and is safe with all types of jewelry. Even the easily damaged opals can be cleaned in this solution. Allow your jewelry to soak for 15 seconds then rinse with water and dry.


What product will clean smoke damaged walls after a small fire?

Grease Lightening works great on smoke damage


Can vinegar clean jewelry?

I haven't seen vinegar clean jewelry but I saw my girlfriend clean my tarnished earrings with toothpaste. I was amazed.


What should I use to clean my body jewelry?

Clean your jewelry with isopropyl alcohol, or at least 80% cleaning alcohol if you have that.


Does homeowners insurance cover Clean up after furnace malfuntion?

I have a mobile home and the furnace caught on fire and is now damaged does my homeowners insurance cover this as a replacement


What household product can you use to clean gold jewelry?

A solution of half Mr. Clean and water with a small amount of ammonia can be used to clean gold jewelry. This same solution is used in the ultrasonics of many jewelry stores including chain jewelry stores. I will add a link to a full article about cleaning fine jewelry.


How do you clean hgf jewelry?

"HGF" or hollow gold filled jewelry is considered a fine jewelry and should be treated with the same caution when cleaning. To clean HGF jewelry a solution of Mr. clean, water, and ammonia can be used. Mix half Mr. Clean and water with a small amount of ammonia. This is safe for all types of fine jewelry and is used by many jewelry stores. Allow the jewelry piece to soak for 15 seconds in this solution then rinse with water and dry.


How do you clean da vinci jewelry?

The Da Vinci Jewelry I know of is considered fine jewelry and since fine jewelry needs special care I will explain how to clean fine jewelry which will be good for all types of jewelry. A solution of half Mr. Clean and water with a small amount of ammonia can be used to clean all types of fine jewelry. Soak the jewelry piece for 15 seconds then rinse in cold water and dry. This solution is used by many jewelry stores I know of and they use it for all types of jewelry including inexpensive jewelry, fine jewelry, and even opals, and emeralds. A bowl can be used, but an ultrasonic is better. Repeat if the piece is extra dirty.


Why are diamonds used in jewelry?

its strong, transparent and cannot be scratched or damaged


Remove jewelry when cleaning nose piercing?

You have to remove the jewelry and clean it, including the piercing.


What are some hygiene tips for body jewelry wearers?

Always make sure to clean both your jewelry and the piercings themselves with hydrogen peroxide to avoid infection. Store your jewelry in a safe and clean location. Never purchase plated jewelry.


How do you clean jewelery?

It depends on what the jewelry is made of.