If speaker systems have Amplifier (home made).... Then you just combine their inputs so that ground couples with ground and signal input wires attached to the input wires or with connector.
You can buy wireless speakers.That means that they communicate with your stereo like a cordless phone. You can also buy the same type of device to convert your current speakers to wireless. You have to have a power outlet near the speaker and then you connect the device to each speaker and another component to the stereo.
Any stereo amplifier these days can connect to a speaker from the 1950's. You will just have to connect one side, left or right, to the speaker. You won't get stereo. If your receiver has the option, you should select mono output to combine the signal of both channels. Never connect the left and right speaker leads together to one speaker.
it can effect the quality of the speakers :) :)
you plug them in
Speaker cable is used to connect the speaker outputs on audio devices such as a receiver or amplifier to the inputs on the speaker(s).
Connect them to the TV
The speaker you connect to those terminals needs to be 4 ohms or greater.
You can connect a 14 speaker jack to a home tuner stereo receiver using the RCA connector.
At the back of the cone where the wires connect in
i wanna know if you can really blow a car speaker i wanna know if you can really blow a car speaker
Yes, you can connect a passive monitor speaker to an EMX 5000.
no, it is not possible.