Want this question answered?
buy a headphone to rca adapter
You would have to purchase a Digital to Analog converter and connect the SPDIF (orange RCA connector) to the D/A converter's digital input via a RCA/SPDIF cable. Then you would have to connect some type of headphone amplifier to the line outputs of the D/A converter.
If your TV has RCA audio outputs, you can connect an amplifier to these outputs to plug in speakers. If it has a headphone jack, you can connect computer-type amplified speakers to this output.
To connect an RCA cable to an XLR cable, you must solder links one and three from the XLR together, and connect those two wires to the end of the RCA component, along with the second wire. It is very useful to use a diagram to make sure you connect the correct cables.
Buy a headphone to RCA Ycable. Then hook the headphone side to your PC and the RCA red and white to the Bose.
yes there are adapters at computer stores and radioshack that you can buy
in order to connect the system to a DVD PLAYER ONE REQUIRES THE CONNECTING WIRE WITHAN RCA OUTPUT
That depends. If they're computer speakers and all your wires are headphone-jack style, then all you do is run the headphone wire from your speakers and plug it into your computer speaker input on the sound card, or a headphone jack. If they're not computer speakers and you want to wire component speakers through your computer, you'll need a receiver to power them, speaker wire to go from your speakers to the receiver, and a cable to go from your receiver "input jack" to your computer. That cable should have a red and white RCA on one end, and a headpone jack on the other.
Try to connect yellow into the green input while using red and white to the matching inputs. If this does not work, you may need a converter box sold about anywhere online RCA to digital/HDMi converter.
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
The yellow RCA plug goes into any video in source like the yellow AV in connection on most current TVs or car head unit. Next attach the two red plugs (supplied) together so that the end of the plug has the red and black wires sticking out. Connect the red (+ pos) wire to the power source (battery) + terminal (also red) and ground the black wire. Once power is applied to the camera turn on the video source and you will see the camera's video. Some head units will allow you to connect the red RCA directly without attaching the open end wire adapter.
I believe the most commonly used wire would be an RCA cable.The cable should have 3 plugs, yellow (video), and red and white (audio).