Here are the codes associated with your Panasonic TV: 700, 644, 734, 512, 689, or 510. I have also provided instructions on how to program your Dish remote to your TV.
Address Remote to TV/Other Devices
Depending upon the type receiver you have, you can connect a cable between your DISH receiver to your Panasonic TV. You can use 4 different types of cable: coax, RCA (red, white, and yellow), component (green, blue, and red - you also need audio cable - red and white), or an HDMI cable.
With a coax cable, you place your TV on channel 3 or 4. Newer TVs need to be on Antenna, TV, or Cable once the channel is set to 3 of 4. Any other type cable is set to an input setting.
I have provided the steps to program the remote below, along with the steps to allow the remote to adjust the surround sound system in TV mode instead of the TV.
Addressing Remote to other equipment:
1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Press 2 for other equipment and enter the code. (if the code is 617, enter 2617)
4.) Press Pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.
AUX Volume Override:
1. Press and hold the AUX mode button until all the mode lights light up.
2. Press Pound (#).
3. Press Volume Up.
4. Press 0.
5. Press pound (#) again.
To control you Television with your Dish Satellite remote you need to perform a power scan to find your remote code. With your Dish Network remote, follow these steps:
1) Turn on your TV
2) Hold down the 'TV' button at the top of your dish satellite remote (the one that lights up) until all 4 buttons at the top light up
3) Press the large red power button
4) Press the channel up (above the select button usually) slowly until the TV shuts off
5) Once your Television powers off, press the pound key '#' (at the bottom of your Dish TV remote)
What are the codes for a panasonic tv phillips universal remote c1035a
i need a code for my rca rcr312 and it did not come with the codes
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
To program your DISH Network remote to your TV there are a few different DISH Network remote codes that you can try & will need in order to successfully program your remote to the TV. The DISH Network remote codes for your Curtis Mathes TV will be one of the following, 516, 531, 595, or 253. If you are unsure how to perform the steps to program
A few different DISH Network remote codes for your Insignia TV that you can try & one should successfully program your remote are, 720, 566, 538, or 505.
There are a few different DISH Network remote codes for your Vizio TV that you can try. One of the following codes should successfully program your remote- 505, 627, 507 or 864.
There are only two codes for a Konka TV. They are listed below! Codes: 332, 753
The codes we here at DISH Network have & would use to attempt to program the DISH Network remote with your Olevia TV would be, 506 or 127.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
We do not currently have any remote codes in our data base for a Nexus TV, you should also be able to locate remote codes in the owner's manual that came with the TV.
Here are a few different DISH Network remote codes for your Insignia TV that you can try & one should successfully program your remote are, 720, 566, or 538.
A few different DISH Network remote codes for your Senith TV that you can try & one should successfully program your remote are, 501, 006, 899, or 585.