Want this question answered?
The aperture setting refers to the iris of the camera lens. Like that of your eye, it opens and closes, regulating the amount of light entering the camera body and exposing the film. I always remembered it like this: "The smaller the number (aperture setting), the bigger the hole" and vice versa. If you are in a darker room you need to turn the aperture down to allow more light in so that your prints do not turn out under exposed. You can also adjust your speed setting in correlation with the aperture setting to create greater/less depth of field, meaning what is in or out of focus in front of or behind your subject.
The functional opening is the aperture, the opening that controls the amount of light that hits the photosensitive surface. You may have a camera with interchangeable lenses that screw into and out of the camera's body. The opening into which the lens is screwed is not the aperture.
No, the aperture controls adjust the size of the opening that light enters the camera through (see image above, left maximum aperture setting, right minimum aperture setting).
Aperture priority lets you set the aperture you want and the camera sets the shutter speed for you. You use it when you want to control depth of field. Shutter priority lets you set the shutter speed you want and the camera sets the aperture for you. You use it when you want to control how motion is rendered in the photograph. Program mode sets both shutter speed and aperture for you. Use it when you are not concerned with aperture or shutter speed control.
is a setting on some cameras that allows the user to choose a specific aperture value while the camera selects a shutter speed to match.
shutter speed and lens aperture
The aperature can control the amount of light that comes into the camera just like the pupil of the eye.
the F numbers usually refer to the aperture of the lens which controls how much light can enter the camera. it also affects the depth of field.
The aperture of my camera lens will not open!
The shutter of a camera opens and closes allowing light into the camera, the hole in the shutter is the aperture.
The Shutter and the Aperture are the two controls the Shutter is used to control how long the Film is exposed for and Aperture is used to control how much light is let in
An aperture is a hole where light travels through. Therefore in any camera there is always an aperture - including digital cameras - even if it is fixed