You can't. A three-phase motor works on a completely different principle from a d.c. motor (e.g. there's no electrical connection to the rotor). As well as this, with a d.c. supply, you will only be able to connect one phase of the field windings, and the resistance of that field winding will be low compared with its reactance, and may well burn out if you connected it to a d.c. supply.
A cubic meter is a unit of volume, specifically 1,000 litres.Litres per minute is a unit of flow.Units of volume and units of flow do not correlate without some factor of time. The question is invalid. Please restate the question.
Cmh = cubic meters per hour cfm = cubic feet per minute m3/hr * 35.3ft3/m3 * hr/60minutes = ft3/minute So, 1 cmh = 0.5883 cfm
cm per second x 1.97 (or 1.96850394) = feet per minute* 68.2 x 1.97 = 134.354 feet per second
I believe there are applications on the Market or App Store that can do this.
I assume you are a student. This is a very simple conversion. I suggest you get familiar with conversion tables, on paper and computer based like this one http://joshmadison.com/article/convert-for-windows/ because this is a super-easy task you will be doing daily as a technical professional.
You cannot without knowing the dimensions and shape.
The best way to remove bumper stickers without damaging the car would be to heat the sticker with a blow dryer for about a minute, then begin peeling off the sticker slowly. After it's off apply Goo Off to remove residue.
Convert oxygen litter/minute to percnt
Divide the litres per minute by 4.55
-- to convert the feet to inches, multiply by 12-- to convert the minute to second, divide by 60-- combining these operations, take (feet per minute) and multiply by (12/60) = 0.2
This question cannot be answered in a sensible way. A millimeter per minute is a measure of speed, with dimensions [LT-1]. A cubic metre per minute is a measure of flow rate, with dimensions [L3T-1]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
This question cannot be answered in a sensible way. A millimeter per minute is a measure of speed, with dimensions [LT-1]. A cubic metre per minute is a measure of flow rate, with dimensions [L3T-1]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
A minute is a unit of time. A kilometre is a unit of distance. Without some unit of speed to convert, the two units are incompatible.
Cubic feet per minute x 28.3168 = liters per minute
Multiply liters per minute by 0.0353146667 to get cubic feet per minute.
A yard is a unit of length. A minute is a unit of time. Without some unit of speed to convert, the two units are incompatible.
A minute is a unit of time. A mile is a unit of distance. Without some unit to convert, such as speed, the two units are incompatible.