One pound of steam condenses back to one pound of liquid water. Since one gallon of water weighs 8.337 pounds, simply divide the weight of the condensate by 8.337 to find out how many gallons of condensate you have.
You need to look at a steam table first then Multiply lbs/hr steam x latent heat of evaporation in BTU/lb @ the operating pressure.
Just look up and see the clouds in the sky. Boil some water and watch the steam rise. Those are water molecules that are lighter than air because they are warmer. No, that steam and clouds will not stay suspended for ever.
Steam is nothing but a homogeneous mixture of water & air
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
It depends on the temperature of the steam, which, in turn, will depend on the pressure.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
condensate,bleed line of all condensate
Condensate is what you get when you condense steam (water) that was heated in a boiler to make the steam. I'm not sure what else you are looking for.
condensate in the steam piping, probably due to improper slope of piping to allow condensate flow out.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
1.000 at 60F.
A device that will allow cooler condensate to pass and hold back the higher temperature steam
If the steam pressure is 25 bars the condensate pressure is at most 25 bars. Typically it is slightly less due to friction of the fluid passing through the steam traps. As the condensate approaches the condensate tank, where it is normally vented to atmosphere, the pressure decreases in the system to near atmospheric.
The number of pounds in a gallon of water changes with temperature. At 100 degrees Celsius, there is about 8 lbs. per gallon of water. So with one thousand lbs. of steam, we would have around 125 gallons of water.
It works on the principle that condensate at a given temperature will flash to steam after pressure has been significantly reduced.
When the steam hits colder piping it turns to condensate and the steam hitting the water (condensate) produces hydraulic shock waves.