If the plate height gets higher increase the depth of the birds mouth that sits on the plate. The birds mouth is the notch cut out of the rafter that allows it to sit flat on the top of the plate. If the plate is low then you will need to place a packer on top of the plate.
i have no clue but i love them and i will find out for u guys love me fans look me on on face book
All birds have ears, they just have holes on each side just behind where the beak hinges
The egg tooth is the structure that develops on the upper mandible, near the tip of the beak, in a chick before it hatches.The neck muscles push the egg tooth against the shell to crack it open.
20
All birds have that, it is to give their beak some flexibility. It's not a hole, it is covered with skin. If the beak was solid, when they opened their mouth it would cut into their throat. With the gap there, the sides of the beak can move past the head and let them open their beak.
yes all birds have a beak or a bill
If the plate height gets higher increase the depth of the birds mouth that sits on the plate. The birds mouth is the notch cut out of the rafter that allows it to sit flat on the top of the plate. If the plate is low then you will need to place a packer on top of the plate.
Yes All Birds Have a beak I haven't seen or heard of a bird without a beak
wings and a beak
yes all birds have a beak or a bill
No, they are birds and birds have beaks.
A Jack rafter is a rafter that has the pitch of the roof cut onto one end with a 54 degree angle this sort of rafter is one of several that fit onto a hip ridge. To cripple a piece of timber means to cut it partway through in order to straighten it if this is done to a wall timber it will need to be splinted to restore the strength of the stud
Chase
no they have a beak
With its beak?
with its beak