0
You can use the same drill you use for drilling metal. Answer: Yes you can use a metal drill bit, but you have to be very careful with Plexiglas when drilling, it can chip-out, break-out, or even crack the Plexiglas.
The way to drill without no chip-out is to sandwich the Plexiglas between two pieces of wood. TIP: make sure the Plexiglas is held tight between the 2 pieces of wood when drilling.
Wiki User
∙ 15y ago
Wiki User
∙ 15y agoYou can cut it with a sharp carbide blade, (just go slow) A "triple chip" blade is best.
If the plexi is thin (1/8" or less) you can use a "scorezall" or the back side of a utility knife blade to score it deeply (make several passes) and then you can snap it along the scored line, but the saw works best.
Wiki User
∙ 13y agohow you cut a hole it it would be using another piece of glass a diamond or go to a 'stained glass shop' and get a glass cutter
Wiki User
∙ 11y agoWith a water fed tile saw and a diamond blade.
Add your answer:
Earn +20 pts
Why diamond is best for cutting glass?
Glass can always be cut by diamond, so if precision is required over a variety of glass types, diamond will be preferred as the cutting tool.
What is the best hand tool to use for cutting thick glass?
The NATTCO PC2120A 20" DIY Tile Cutter for cutting Tile, Glass, and Mosaic works well.
What is the best method to put out a gasoline fire?
Smother it- cutting off the air from the fire.
A sheet of paper can be withdrawn from under a glass of milk without spilling it if the paper is removed quickly This best demonstrates that?
The glass of milk has inertia that holds it in place.
What can be used to secure pieces when making a glass mosaic?
Glass mosaic are really complex structures. If the mosaic will be placed on the floor the best way to attach it to the ground is by using concrete. In case the mosaic will be placed on a wall the best method to use would be glass glue.
What safety measures when handling corrosive chemicals?
This varies by material. The best method to determine this is to consult the MSDS (Material Safety Data Sheet).
What method would be best for separating sand from a solution of potassium chloride?
Via filtration, through a 0.45um glass fibre filter.
Who sells the best cz jewelry?
the best known cz's are Russian cz. next to the Russian cz,are the ones cut in Switzerland,as they are known for cutting the most famous glass in the world,swarovski crystal.
When cutting wall paneling with a portable circular saw the best method you can use to eliminate chipping on the face of the paneling is to?
Use a fine tooth saw blade.
How do I brew adagio tea?
The best way to brew adiago tea is with a glass tea brewer. It filters out the tea very nicely. It's my favorite method.
Where is the best place to woodcut in RuneScape?
Depends what you are cutting. If you are cutting normal trees, around the Grand Exchange would be the best place. If you're cutting oak trees, northwest of the northern varrok bank would be the best. If you're cutting willow north of the draynor bank would be the best. If you're cutting yews south of falador would be the best. If you're cutting member logs look it up on runescape wiki.
Is CNC the best cutting system out on the market?
CNC currently offers the best cutting solutions for industrial usages. Many manufacturers use CNC cutting machines.
